This lever-start torque limiting screwdriver, model EA-BN412LH/C6F, has a range of 1.3 – 10.42 in-lbs with a housing designed to ensure the operator’s comfort through an elongated bottom component. This component allows the attachment of a stainless steel mounting flange, which is utilized in automated assembly processes.
- Lever Start
- 1.3 – 10.42 in-lb
- RPM 1400/2000
- Lever start
- Full Auto Shut-Off clutch
- Stainless steel mounting flange included
- Brushless Motor (ideal for clean-rooms)
- Ergonomic Soft Grip
- One year Warranty
- Stainless steel mounting flange included
- Excellent combination of power and ergonomic features
- Automatic shut-off precision clutch
- Reverse/forward switch
- Torque adjustable by external dial.
- Power source: 24 or 32 VDC
- Torque setting: Stepless
- Torque range: 1.3 – 10.42 in-lb (1.5 – 12 kg-cm)
- High R.P.M: 2000
- Low R.P.M:1400
- Standard Torque Deviation: +-3%
- Weight: 1.19 lb (540g)
- Length: 9.45″ (240mm)
- Grip diameter: 1.4″ (36mm)
- CE certified
This lever-start torque limiting screwdriver, model EA-BN412LH/C6F, has a range of 1.3 – 10.42 in-lbs with a housing designed to ensure the operator’s comfort. It has a brushless motor that generates less heat, requires less maintenance, and is ideal for clean-rooms. A selection of power supply controllers are available that provide Hi/Lo speed, Slow Start, Output Signals, fastener counter and a run down verification functionality. This driver also features an elongated bottom component to compensate and allow for the attachment of a stainless steel mounting flange, which is utilized in automated assembly processes. This driver can be controlled from an external PLC, a SP-BC32HL101T/C6 power supply switch, or an EAA-SCBSN6 signal controller. Common usages for this screwdriver are demanding assembly fastening applications that require one or all the following: torque control, ESD protection, or screw counting functionality. Does not include power supply.
Power Supply & Controllers available for the EA-BN412LH/C6F
1) SP-B32HL61T1/C6: Power supply that supports Hi/Low RPM.
2) SP-BC32HL101T/C6: Power Supply, Screw Counter and signal controller: Power supply with Hi/Low RPM, slow start, input/output signals, and screw counter with run down verification functionality.
3) EAA-SCBSN6: Signal control with built in I/O slots used for automation. Should be used with power supply option 1 above.
The list below is the common replacement parts. If you do not see the part you are looking for please use the following schematic and fill out a replacement part form . We will contact you immediately with cost and delivery information.
Power Cord Assembly EPAA50001-56N
Power Cord Assembly EPAA50001-84N
Power Cord Assembly EPAA50001-139N
-
Torque Adjuster
Nut EAA-TA3$25.00 -
Signal Controller for Brushless Screwdrivers EAA-SCBSN6
$440.00 -
Torque Cover
EAA-TL6$6.00 -
Certification of
Calibration$60.00 -
EAA-AH2 90 Degree
Angle Head Attachment$155.00 -
DC Power Supply
SP-B32HL61T/C6$145.00 -
Counting & Automation Power
Supply SP-BC32HL101T/C6$635.00 -
Torque Meter QCIO-200
$1,195.00
Tool Support Systems
Torque Meters
Screw Feeders
Screw Presenters
