The EMW-B1450-30 is a Pistol Grip Cordless pulse Wrench (working torque: 35.4-309.7 in-lb) with a brushless motor and Auto Shut-Off clutch. This package comes with a remote, two batteries and a battery charger.
- 35.4 – 309.7 in-lbs
- RPM 1900, BPM 2500
- Programable Torques and Pulses
- Precise-machined mechanical pulse mechanism
- Input settings (Job level control settings)
- Store up to 5 torque setting jobs
- 6 power settings available pre job
- Number of impacts set by job
- Number of turns set by job
- Fasteners count set by job
- User sets torque, number of pules and number of turns.
- Comes with Battery (BP1430L)
- Comes with Charger (BC16L01 )
- Cordless Screwdriver
- Durable Brushless Motor
- Excellent combination of power and ergonomic features
- Remote Control Program Unit can be used to set control tool
- Easy one finger Reverse/forward switch
- Built in LED light
- Program data display panel
- OK/NG indicator for error warning
- Single Program working cycle model (use for 1 fastener job)
- Multi-Program working cycle model (use for more then 1 fastener job).
- Can store up to 5 jobs.
- Power source: 10.8V Li-ion Battery
- Drive: 3/8″ Square
- Working Torque: 35.4 – 309.7 in-lbs
- Bolt Capacity: M8 (8.8~12.9) M10 (6.8~8.8) M12 (4.6~4.8)
- B.P.M: 2,500 bpm
- R.P.M: 1900 rpm
- Weight: 2.87 lbs with Battery
- Length: 6.89″
- Height: 7.72″
- CE Certified: Yes
The EMW-B1450-30 is a Pistol Grip Cordless Impulse Screwdriver (working torque: 35.4-309.7 in-lbs) with an ergonomic design to ensure operator’s comfort. This Impulse tool has a brushless motor and shuts-off automatically once the set torque is reached.
The following settings can be set at the job level to help automate a fasting process:
-
- Store up to 5 torque setting jobs – each tool can store up to 5 user defined jobs
- 6 power settings available pre job – choose from 1 of six power settings each setting has torque range
- Number of impacts set by job – impacts control the final torque on a fastener
- Number of turns set by job – fastener error check (i.e. striped fastener)
- Fasteners count set by job – set number of fastener per job
The input settings are entered via a remote control or input keys on tool. The EMW-B1450-30 provides reliable high torque with job control and fastener checking.
This package comes with 2 batteries and a battery charger, everything you need to get started.
Check Battery storage every three months, make sure the battery stays at least 80% charged. If battery storage is not checked routinely to make sure it stays at least 80% charged there could be complications and the battery will not work properly.
Please look at the product manual (located above) and fill out a replacement part form if you need a part that you can not find. We will contact you with cost and delivery information.
Tool Support Systems
Torque Meters
Screw Feeders
Screw Presenters