The SMT-A250A is a DC angle screwdriver featuring a state-of-the-art brushless motor and offering a torque range of 27.7 to 221.28 in-lbs. This advanced tool is complemented by a smart controller unit with an intuitive touchscreen interface. The touchscreen allows users to easily configure the screwdriver for various assembly tasks and provides a visual display of torque and angle outputs.
For pricing please request quote below.
- Lever, Push, or Remote Start
- 27.70 – 221.28 in-lbs
- RPM: 20 – 250
Transducer Screwdriver:
- Lever or Remount start
- Full Auto Shut-Off System
- LED Status Indicators (ok, error, etc.)
- Temperature protection
- Full traceability and error proofing capabilities
- Comes with ESD Safe Housing
- Ergonomic Soft Grip
- SMT-C2 Smart Control Unit is Required
- One year Warranty
- Brushless Motor (ideal for clean-rooms)
- Excellent combination of power and ergonomic features
- Reverse/forward switch
Smart Controller:
- Intuitive user interface touch screen
- Multiple programs and sequences for assembly job configurations
- Tracks vital tightening information at the job and part level
- Input/Outputs allow for external control of the screwdriver
- Easily integrated into a robot environment
- Input/Output Control Signals
- Serial Port Control Communication/Interface
- Supports Modbus
- WiFi and LAN Control Communication/Interface
- Power source: 40 VDC
- Torque setting: Stepless (set via user interface)
- Torque range: 27.7 – 221.28 in-lbs (31.93 to 255 kg-cm)
- R.P.M: 40-600 (set via user interface)
- Standard Torque Deviation: 3 Sigma Average 5%
- Communication Protocols: Input/output signals, Serial Port, Wi-Fi and LAN, Modbus protocol all supported!
- Weight: 6.5 lbs (2930g)
- Length: 18.4″ (468 mm)
- CE certified
Pairing the SUMAKE SMT-A250A Transducer DC Angle Screwdriver with the SMT-C2 smart controller enables operators to track tightening status, configure tightening parameters (torque/thread/time) and transfer data a variety of different ways. A transducerized inline electric torque and angle screwdriver is a specialized tool that is designed to apply a specific torque and angle to screws or bolts. It utilizes a transducer to measure the torque and angle applied by the user and provides feedback in real-time. Users are able to switch the SMT-A250A Transducer DC Screwdriver between multiple customizable programs to achieve various tightening tasks. This Unit is easily set-up and can be operated either from the panel or a PC or PLC.
You enter a fastener’s profile into this system and then associate the fastener with a job that allows you to control all aspect of the tightening process (for example):
- Torque Control – Configurable user interface sets torque, turns and timing limits by job and fastener.
- Angle Control – greatly improve the accuracy and efficiency for assembly tasks.
- Data – With integrated SD card module, data logging, processing or transferring can be easily done without an internet connection or external module.
- Rundown Control– Complete control of the rundown process, for example run down to a torque value and then reverse a certain number of turns.
- Screw Counting – Associate a number of screws to an assembly job and verify all screws are inserted before operator move to next part.
- Part Association – Allow for tracking festering information at the assembly part level.
- Remote Control – Use a computer or PLC to remotely control the start and stop of the screwdriver (great for robot automation)
- Security: – Settings can be locked up using password and key to prevent unauthorized adjustment.
This system has it all and can be customized to your assembly application. Have a question? Request more information to find out the full capabilities of this tool today.
Please look at the product manual (located above) and fill out a replacement part form if you need a part that you can not find. We will contact you with cost and delivery information.
Tool Support Systems
Torque Meters
Screw Feeders
Screw Presenters