QUESTIONS OR NEED HELP?  Call 1-866-863-2302

DC Transducer Screwdriver

The SMT-180I is a Transducer DC Screwdriver with a state of the art brushless motor and a torque range of 31.9 – 159.3 in-lbs, and comes with a control unit as well as a PC software kit. The PC software kit is used to setup the screwdriver for your assembly jobs.

For  pricing please request quote below.  

Key Features
  • Lever, Push or Remote Start
  • 31.9 – 159.3 in-lb
  • RPM 60-450

Call for Quote 603-578-9965Request a Quote


Transducer Screwdriver:

  • Lever and Push to start
  • Full Auto Shut-Off clutch
  • LED Status Indicators (ok, error, etc.)
  • Temperature protection
  • Full traceability and error proofing capabilities
  • Comes with ESD Safe Housing
  • Ergonomic Soft Grip
  • SMT-C1B Smart Control Unit is required
  • One year Warranty
  • Brushless Motor (ideal for clean-rooms)
  • Excellent combination of power and ergonomic features
  • Reverse/forward switch

Smart Controller: 

  • Intuitive user interface
  • Multiple programs and sequences for assembly job configurations 
  • Tracks vital tightening information at the job and part level
  • Input/Outputs allow for external control of the screwdriver
  • Easily integrated into a robot environment 
  • Input/Output Control Signals
  • Serial Port Control Communication/Interface
  • WiFi and LAN Control Communication/Interface
  • Power source: 32/40 VDC
  • Torque setting:Stepless (set via user interface)
  • Torque range: 31.9 – 159.3 in-lb (36.7 – 183.6 kg-cm)
  • R.P.M:  60-450
  • Standard Torque Deviation: +-7%
  • Communication Protocols:  Input/Output  signals,  Serial Port, WiFi and LAN all supported!
  • Weight: 2.49lb (1129.45g)
  • Length: 12.33″ (312.6mm)
  • Grip diameter: 1.6″ (40mm)
  • UL and CE certified

Pairing the SUMAKE SMT-180I Transducer DC Screwdriver with the SMT-C1B smart controller enables operators to track tightening status, set up different tightening parameters (torque/thread/time) and transfer data a variety of different ways. Users are able to switch between multiple customizable programs to achieve various tightening tasks. This Unit is easily set-up and can be operated either from the panel or a PC or PLC.  

You enter a fastener’s profile into this system and then associate the fastener with a job that allows you to control all aspect of the tightening process (for example):

  1. Torque Control – Configurable user interface sets torque, turns and timing limits by job and fastener.
  2. Data – All fastener information can be stored electrically for future reference.
  3. Rundown Control– Complete control of the rundown process, for example run down to a torque value and then reverse a certain number of turns.
  4. Screw Counting – Associate a number of screws to an assembly job and verify all screws are inserted before operator move to next part. 
  5. Part Association – Allow for tracking festering information at the assembly part level.
  6. Remote Control – Use a computer or PLC to remotely start and stop screwdriver (great for robot automation)
  7. Security: Ability to lock the system so operators are unable to change settings. 

This system has it all and can be customized to your assembly application have a questions request more information to find out the full capabilities of this tool today.