QUESTIONS OR NEED HELP?  Call 1-866-863-2302

DC Transducer Screwdriver

The SMT-A180I is a Transducer DC Screwdriver with a state of the art brushless motor and a torque range of 19.91 – 159.3  in-lbs . This advanced tool is complemented by a smart controller unit with an intuitive touchscreen interface. The touchscreen allows users to easily configure the screwdriver for various assembly tasks and provides a visual display of torque and angle outputs.

Key Features
  • Lever, Push, or Remote Start
  • 19.91 – 159.3 in-lbs
  • RPM: 30 – 550

Call for Quote 603-578-9965Request a Quote


Transducer Screwdriver:

  • Lever and Push to start
  • Full Auto Shut-Off clutch
  • LED Status Indicators (ok, error, etc.)
  • Temperature protection
  • Full traceability and error proofing capabilities
  • Comes with ESD Safe Housing
  • Ergonomic Soft Grip
  • SMT-C2 Smart Control Unit is required
  • One year Warranty
  • Brushless Motor (ideal for clean-rooms)
  • Excellent combination of power and ergonomic features
  • Reverse/forward switch

Smart Controller: 

  • Intuitive user interface touch screen
  • Multiple programs and sequences for assembly job configurations 
  • Tracks vital tightening information at the job and part level
  • Input/Outputs allow for external control of the screwdriver
  • Easily integrated into a robot environment 
  • Input/Output Control Signals
  • Serial Port Control Communication/Interface
  • Supports Modbus
  • Wi-Fi and LAN Control Communication/Interface
  • Power source: 40 VDC
  • Torque setting: Stepless (set via user interface)
  • Torque range: 19.91 – 159.3 in-lbs (22.95 -183.6 kg-cm)
  • R.P.M:  30 – 550
  • Standard Torque Deviation: +-5%
  • Communication Protocols:  Input/Output  signals,  Serial Port, Wi-Fi, Modbus and LAN all supported!
  • Weight: 3.22 lbs (1460 g)
  • Length: 3.27″ (337 mm)
  • CE certified

Pairing the SUMAKE SMT-A180I Transducer DC Screwdriver with the SMT-C2 smart controller enables operators to track tightening status, set up different tightening parameters (torque/thread/time) and transfer data a variety of different ways. A transducerized inline electric torque and angle screwdriver is a specialized tool that is designed to apply a specific torque and angle to screws or bolts. It utilizes a transducer to measure the torque and angle applied by the user and provides feedback in real-time. Users are able to switch between multiple customizable programs to achieve various tightening tasks. This Unit is easily set-up and can be operated either from the panel or a PC or PLC.  

You enter a fastener’s profile into this system and then associate the fastener with a job that allows you to control all aspect of the tightening process (for example):

  1. Torque Control – Configurable user interface sets torque, turns and timing limits by job and fastener.
  2. Angle Control – greatly improve the accuracy and efficiency for assembly tasks. 
  3. Data – All fastener information can be stored electrically for future reference.
  4. Rundown Control– Complete control of the rundown process, for example run down to a torque value and then reverse a certain number of turns.
  5. Screw Counting – Associate a number of screws to an assembly job and verify all screws are inserted before operator move to next part. 
  6. Part Association – Allow for tracking festering information at the assembly part level.
  7. Remote Control – Use a computer or PLC to remotely start and stop screwdriver (great for robot automation)
  8. Security: Ability to lock the system so operators are unable to change settings. 

This system has it all and can be customized to your assembly application have a questions request more information to find out the full capabilities of this tool today.


Please look at the product manual (located above) and fill out a replacement part form  if you need a part that you can not find. We will contact you with cost and delivery information.