Cordless Brushless Industrial Angle Screwdriver EAS-B1807A-30 22.1 – 62.0 in-lbs (Full Auto Shut-Off)
- Angle – Lever Start
- 22.1 – 62.0 in-lbs
- RPM 850/550
- Angle Wrench
- Cordless Screwdriver
- Brushless Motor
- Sold as kit with two batteries and one charger
- Excellent combination of power and ergonomic features
- Reverse/forward switch
- Over electric current protection
- Slow rotation protection
- Reverse Control protection
- Battery Self-identified & Sleep mode
- Low power protection
- Thermal protection
- Stall protection
- Power source: 18 V Li-ion Battery
- Drive: Standard Hex 6.35 mm (Options: Hex 5mm and Square Drive 3/8″)
- Torque range: 22.1 lb-in-62 lb-in (2 nm-5 nm)
- Torque Deviation: +- 5%
- R.P.M: 850-550 rpm
- Weight: 2.76 lbs with Battery
- Length: 17.99″
- Height: 3.62″
- CE Certified: Yes
18v Brushless Full Auto Shut-off Cordless Angle Wrench -Industrial- Brushless Motor EAS-B1807A-30 is a Angle Wrench Cordless Driver with an ergonomic design to ensure operator’s comfort. The brushless motor generates less heat and is ideal for clean-rooms. During storage check battery every 3 months to make sure it stays at least 80% charged. If the battery capacity is not checked routinely while being stored, possible complications may occur. Check Battery storage every three months, make sure the battery stays at least 80% charged. If battery storage is not checked routinely to make sure it stays at least 80% charged there could be complications and the battery will not work properly.
Tool Support Systems
Torque Meters
Screw Feeders
Screw Presenters
